Origin	China
Model Number	TPT-8020A
Brand Name	OF

TPT-8020A Cable and Network Tester

TPT-8020A is an easy-to-use and portable test set with advanced cable locator and simple network tester in one unit. Besides identifying wire map, measuring the cable length, diagnosing cable faults and tracing cables, the TPT-8020A can also be used to simply perform network testing. It is an absolutely necessary tool for cabling construction and network maintenance.

 Length measurement---twisted-pair, phone line, coax and wires, etc
Wire map testing--- display wire map; conduct tests of STP/UTP and diagnoses faults for shorts, opens, reversals, mis-wires and split pairs and perform cable tests per T568A/B Standard 
    Tone tracing: generate up to 4 distinctive tones for tracing cables in the ceiling and DDF.    
   Audio line-tracking optional) 
    Port identification: identify port and jack type. e.g. Ethernet and Telephone, with speed and   
   duplex displaying; support 1000M in maximum
Network Test
    Flash port LED--- to locate a hub or switch port
     Ping test and packet loss detection
     Support static and dynamic (DHCP) IP configuration
     Net Scan--- Verify active host quantity in the set Subnet and display IP.& MAC Add
Others
      Auto-off (power saving)
      Backlight LCD display: operational even in the darkness
Features
      Comprehensive functions: support cable testing and network testing
      Tone tracing: locate the cable on DDF without sorting out cables
       Net Scan: fast scan all of the active hosts in the LAN
      Test several cables simultaneously by selecting multi-remote ID
Specifications
General
Battery: 9V
Continuous operation time: 50 hours (cable testing/ without backlight )
Continuous operation time: 15 hours (network testing/ without backlight )
 Display: 128×64 LCD
 Weight: 300g
Size: 134×74×46mm
 System language: Chinese, English
 Test Index
Cable length test range: 1—457 meter
Cable length test method: capacitance
Support single ended measurement and adjust the length parameter
Support wiremap displaying
 Cable faults detection: opens, shorts, split pairs and miswires
Support simultaneous testing of several cables ( selecting 8 remote ID )
Tone tracing: support 4 distinctive tones, which can be sent through any pins
 Ping test: display packet loss
 DHCP test: display acquired IP, Gateway and DNS server, etc.
Net Scan: display searched host information
Port identification: report telephone volt and network attribution

Key Functions
Cable Testing

Configuration
           Basic

  Optional